All Raytec illuminators are supplied with a mounting bracket and a . Optional mounting brackets and power supplies are available if required.
Raytec - Brackets
Standard Bracket Raytec illuminators are supplied with an Adaptive Illumination
(AI bracket) to allow alteration of the beam angle, and a small circular U bracket which allows for up/down and left/right adjustment when fitted to a flat surface. The Raymax 25 and Raylux 25 are provided with a U bracket only.
Wall Mount When mounting to a wall the WB1 wall bracket can be used. The WB1 is a small L shaped bracket which provides up/down and left/right adjustment when used with the standard bracketry on Raytec illuminators.
PTZ Mounting The best solution for mounting with PTZ cameras is a flat sandwich bracket that fits between the camera housing and the PTZ motor. This bracket can have either one protruding arm for single unit installations (SB1), or two protruding arms for twin unit installations (DB2).
Dome Mounting Raytec provide the PB-180 and PB-360 brackets for mounting with dome cameras. These brackets are 180 or 360° circular sandwich plates that fit between the top of a pole and the dome camera. The PB-180 and PB-360 have 2” PCD and 4” PCD mounting connections.
Raytec - Power Supply Units
All Raytec PSU’s deliver current controlled output. They are specifically designed to provide a high level of functionality and reliability.
Standard PSU Standard Raytec PSU’s are provided with power adjustment (0-100%), an externally rated photocell with photocell sensitivity adjustment, and a telemetry input to allow the unit to be controlled via an external trigger.
• ADJUSTABLE POWER
Greater on scene flexibility reduce over illumination
• ADJUSTABLE PHOTOCELL
Accommodate for different light environments
• TELEMETRY INPUT
Switch on via PIR or central control room
Premium PSU The Premium PSU includes all the features of the standard
PSU plus a photocell following contact and a 12vdc output
(for cameras etc). The photocell following contact can be
used to switch day / night cameras into black and white
mode in conjunction with the illuminator.
Standard PSU features plus:
• 12V DC OUTPUT
Suitable for LV camera supply
• PHOTOCELL FOLLOWING CONTACT
Can be used to switch Day/Night cameras to black & white mode
Pulsed PSU The Pulsed PSU is specifically designed to pulse Raytec illuminators in sync with cameras. It contains power adjustment, 12vdc output to power cameras and video in/out connections to sync pulse timing with the camera.
• SYNCHRONISED LED PULSING WITH CAMERA
Ideal for specialist lighting application such as machine vision and ANPR/LPR
• 12V DC OUTPUT
Suitable for LV camera supply
• ADJUSTABLE POWER
Greater on-scene flexibility reduce over-illumination
NOTE: Multiple PSUs are available to power mulitple Raymax and Raylux units. Low voltage PSU's available for 25 and 50 series lamps.
