The Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE802.3af standard-compliant or pre-standard.
The PoE Tester identifies the existence and type of Power Sourcing Equipment (either End-span or Mid-span) in your network
PowerDsine PoE Tester - Features
•
Tests RJ-45 outlet for the presence Power over Ethernet
•
Indicates the type of power source
•
Detects:
IEEE 802.3af mid-spans and switches
Cisco pre-standard in-line switches
High Power mid-spans
•
Compact design specifically tailored for system integrators and installers
•
Plug and play, simple to use
PowerDsine PoE Tester - System Description
A PoE system comprises a PSE (Power Sourcing Equipment)and a PD (Powered Device).
The PSE may either be an End-span (i.e. a layer 2 Ethernet Switch with integrated PoE) or a mid-span, while the PD is a PoE-enabled terminal, such as IP phone, Wireless LAN access point and Network Security Camera.
The PoE Tester check your RJ-45 outlet for power and identify its source, Mid-span or End-span, i.e. IEEE 802.3af standard compliant Mid-spans/Switches and Cisco pre-standard Proprietary In-line Switches.
owerDsine PoE Tester - How to Use
•
Connect a standard category 5 cable with RJ-45 connectors to the PoE tester and the RJ-45 outlet (See table).
•
Check the LED indicators on the front panel for power and source (PoE switch,Mid-span or High Power Mid-span).
PowerDsine PoE Tester "Technical Data Sheet", 89kB pdf file.
To view the .pdf file, you will need the free Adobe® Acrobat® Reader or plug-in. If you do not have Acrobat Reader, please select the "Get Acrobat Reader" icon for further instructions.
PowerDsine PoE Tester "Technical Data Sheet", 89kB pdf file. 