PowerDsine PD-S-801 High Power Splitter is installed in conjunction with the PowerDsine 8012/8006/8001 High Power Mid-spans to power legacy terminals with non-standard power characteristics as defined by the IEEE 802.3af standard, i.e. non 48Vdc input and more then 12.95W power consumption.
The PD-AS-801 splitter receives one data and power input cable from the High Power Mid-span and separates them into two outputs, terminating at a power port and RJ-45 jack.
The active splitter supplies a totally secure power source, keeping the Ethernet device fully protected against any misuse or mistaken connection.
The PD-AS-801 High Power over Ethernet Active Splitter enables products that lack built-in support for Power over Ethernet to receive both power and data from a network connection.
PowerDsine Active Splitter PD-AS-801 - Features
•
The PowerDsine PD-401 Power over Ethernet Active Splitter enables fast and easy integration of Power over Ethernet technology into end devices
•
Separates the converged data and power lines into two independent lines, connecting to the Ethernet device according to the original design
•
Saves time and money in the installation of Ethernet networks and promotes the benefits of using one central source to power all the IP devices in the network
•
Simplifies the modification of a device to be Power over Ethernet enabled, saving all the risks involved in redesign of the power stage in this device by a simple add on box
•
Ensures full compliance with the IEEE 802.3af standard
Request Information:
PowerDsine High Power Active Splitter PD-AS-801/12 - Specifications
PowerDsine High Power Active Splitter PD-AS-801/12 - Specifications
Parameter
Description
Dimensions
(H) 33mm x (W) 75 mm x (L) 120 mm
(H) 1.75" x (W) 3.0" x (L) 4.8"
Input Power Requirements
RJ45 Data and power input on spare and data pairs
Outputs
RJ-45 Data Output connector
DC Voltage +12V output (DC connector 5.5 x 3.3 x 1mm and 5.5 x 2.5mm)
Output Power
Continuous: 22W
Peak: 26W (up to 10 seconds)
Detection Mechanism
IEEE 802.3af signature on both Data and spare pairs
Weight
175gm
Operating Ambient Temperature
0° to 40°C (32° to 104°F)
Operating Humidity
Maximum 90%, non-condensing
Storage Temperature
-25° to 85°C (-13° to 185°F)
Storage Humidity
Maximum 95%, non-condensing
Operating Altitude
-304.8m to 3048m -1,000 to 10,000ft
Regulatory Compliance
CE
Electromagnetic Emission and Immunity
FCC Class B Part 15 with FTP cabling
EN55022 (CISPR 22) Class B with FTP cabling
EN50024 (CISPR 24)
