The main window provides a single interface to organize and monitor. On start-up, Axis Camera Management lists all the devices found on the local network in the All Devices group. Devices that need attention are listed in the Warnings/Errors group. You can create custom groups and sub-groups in My Groups in order to organize devices e.g. according to location or model.
The properties of a single device can be viewed by highlighting a device from the list.
Axis Camera Management - Assign IP-Address
The IP address in a device may need to be changed for various reasons, e.g. when configuring a device for the first time.
Axis Camera Management allows easy assignment and change of IP addresses. You can set the IP address manually, or suggest available IP addresses from a specified range to speed up the process of assigning the IP address in multiple devices. You can specify the IP address for one device at a time, or enter a range of IP addresses (see below).
Axis Camera Management - Upgrade multiple Axis video products with new firmware
Single or multiple Axis video products/devices of different models can easily be firmware upgraded in sequence or in parallel.
Axis Camera Management allows easy assignment and change of IP addresses. You can set the IP address manually, or suggest available IP addresses from a
On the Axis Web site www.axis.com/techsup, you first check for the latest firmware releases and save these to your hard disk.
Upgrade firmware in multiple devices in Parallel to reduce the time required, or choose Sequence to have fewer devices offline when upgrading.
You can also restore all upgraded devices to their original factory settings (see right).
Request Information:
Axis Camera Management "Technical Data Sheet", 184kB pdf file.
To view the .pdf file, you will need the free Adobe® Acrobat® Reader or plug-in. If you do not have Acrobat Reader, please select the "Get Acrobat Reader" icon for further instructions.
Axis Camera Management "Technical Data Sheet", 184kB pdf file.